Quote:
Originally Posted by '68OrangeSunshine
Hi TJ. Long time.
I have the '68 Chassis Service Manual and Chassis Overhaul Manuals.
[Might be close.]
No listing for Dana 60 per se,
but I get
2400 thru 3600, 65 Ft Lbs for Wheel Stud Nuts, and under Axle Shaft To Hub Bolts there is a long dash -- in this range.
For
5200 thru 7200, Hub Bolts specifies 90 Ft Lbs
and 75 Ft Lbs for Wheel Stud Nuts
Carrier Cover bolts torque to 20 Ft Lbs in both cases.
Hope this helps.
 |
Thanks! Get's me a start for sure. haha