View Single Post
Old 01-20-2005, 09:51 PM   #6
ureckme
ureckmefixit2@cox.net
 
Join Date: Dec 2004
Location: Mesa AZ. (Phoenix)
Posts: 1,284
Your carb. is not to big. We will fix it a little at a time. #1 Put your stock jets or 1 size bigger back in. Set your mixture screws so your vacume is the highest it will get. Set your timing with vacume gauge to get best vacume level. Take reading on vacume. ( Do all this in gear if you have an automatic trans. ) Get a power valve 1 to 2 inches under what your vacume is at idle. Make sure there are no vacume leaks anywhere on your engine. This is a good starting point. Let me know when you have made changes.
Matt.
ureckme is offline