The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 Just got my Vintage Air Gen IV kit, any tips?

**Wrenchbender Ret** · 08-09-2022, 11:55 AM

Make Shur you scrape all the insulating material off the inside of the fire wall were the unit goes down to bare metal. There is barely enough room to get it in there.
Make sure the angle of the hose connectors are like they need to be & mark them before crimping them.
Those hoses are stout. You can't twist them.

George

08-09-2022, 11:55 AM	#8
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,190	Re: Just got my Vintage Air Gen IV kit, any tips? Make Shur you scrape all the insulating material off the inside of the fire wall were the unit goes down to bare metal. There is barely enough room to get it in there. Make sure the angle of the hose connectors are like they need to be & mark them before crimping them. Those hoses are stout. You can't twist them. George