The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 57 Fleetside C4 build

Daze57 · 02-25-2021, 01:37 PM

57fleetsidec4
As far as i can tell the hole in the vent frame is just to hold the rubber gasket in place .
if you notice on the gasket -a bump about where it fits into the frame -as you put it together -it;ll line up with the frame hole,
that;s the only thing i could come up with . also i use a dish soap and warm water to put the gasket in ---makes it easier to slide the gasket on .

02-25-2021, 01:37 PM	#53
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: 57 Fleetside C4 build 57fleetsidec4 As far as i can tell the hole in the vent frame is just to hold the rubber gasket in place . if you notice on the gasket -a bump about where it fits into the frame -as you put it together -it;ll line up with the frame hole, that;s the only thing i could come up with . also i use a dish soap and warm water to put the gasket in ---makes it easier to slide the gasket on .