Re: Flat-Out Engineering front end?
Quote:
Originally Posted by Joyridin
Ok. I spoke to Don a few times. What he told me initially and what the instructions say are quite different. When I spoke to him after receiving the parts, he gave me a completely different story.
The video looks like he is using an 84-87 C4 set-up. I am using a 95 set-up. Apparently there is no way to hook up a sway bar on the later set-up. Just curious if anybody found one that works.
|
I have the 84-87 setup. I bough the aftermarket adjustable upper control arms. Same ones that are the linked video.
As for the Sway bar I am gonna run a Splined setup. I will make the links myself.
Engine placement and steering rack setup are my biggest concerns. The again thats what the Plasma cutter and Tig welder is for.
__________________
1984 K5 Blazer 4x4. Because my daily driver needs to be a project too...
1971 C10. Auto Cross/Pro Touring Build. Project : I am gonna go broke with this one.
1970 Chevy LWB 4x4. 355, 4spd, Dana 44 front, Dana 60 rear, 35x12.50 tires... STOLEN
I will put a Turbo on anything with an engine if the $$$ is right. Once upon a time....
|