[Jblackie47803]

Okay, I'm back. Sorry all the project is moving pretty slow. The truck is at my barn on my property 11 miles from my current house. Hard to get out there and get any real time in on it with job and family stuff happening. I welded in New lower door skins, rocker panels, cab corners, and rear floor sections. I decided to use panel bond for the rear wheel arch panels. I welded similar pieces into another project and had trouble with shrinking metal and burning holes through thin spots. I used sheet metal screws to hold the panels in place then just ground the heads off the screws and blended the overlap shoulder down with a flap wheel sanding disc