[Justin71105]

Got my brake pedal mounted yesterday, just need to drill another hole for a second bolt in stock brake arm.

I used my stock brake arm and mounting cylinder, cut the pedal off and welded on a 1996 C1500 pedal for an Auto.

Then cut up the 96 pedal and used the section that mounts to the booster rod and bolted it to my brake arm.

Going to move gas bracket over toward passenger side as far as I can with still keeping it on the flat section of firewall. Then cut arm down so it is in-line with the brake pedal and in line with me sitting in seat.

It can move maybe another half inch towards passenger side from how I have it in pics. Rod was not connected in the pics with both brake and gas pedal, it does not travel quite that far with the booster connected.