The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - DIY Door Panel

Peanut74 · 05-04-2021, 02:12 PM

Been doing some searches but can't find the information that I am looking for. I am in the process of building my own door panels. I have the backing panels cut out and sealed them in case water gets on them. My big question is how to hold the panels to the door skin. I have seen where people have used Velcro with what appears to be mixed results. I really don't want to use screws as I would like to hide the fasteners. Anyone have any suggestions?
Thanks

05-04-2021, 02:12 PM	#1
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 590	DIY Door Panel - Questions Been doing some searches but can't find the information that I am looking for. I am in the process of building my own door panels. I have the backing panels cut out and sealed them in case water gets on them. My big question is how to hold the panels to the door skin. I have seen where people have used Velcro with what appears to be mixed results. I really don't want to use screws as I would like to hide the fasteners. Anyone have any suggestions? Thanks Attached Images __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a million pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk" 2012 Jeep JKU "Crush" 1976 Chevy short bed with a 327 and 3 on the tree (Sold it to buy the Blazer) 1971 Chevy Blazer (Sold it)