The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Brother's keeper

Black_Sheep · 08-08-2017, 10:36 PM

Currently the truck is blown apart, I took advantage of nothing in the way to build a full exhaust system and re-plumb the brake lines...

With the cab off the frame it was pretty easy to shave the firewall using 18 gauge sheet metal, 3M panel bond and a little filler...

Ford HP White with satin clear...

I glossed over a ton of stuff but I covered most of the high points, now it's back to block sanding and more sanding...

08-08-2017, 10:36 PM	#9
Black_Sheep Registered User Join Date: Jun 2017 Location: upper midwest Posts: 1,129	Re: Brother's keeper - '58 Stepside build Currently the truck is blown apart, I took advantage of nothing in the way to build a full exhaust system and re-plumb the brake lines... With the cab off the frame it was pretty easy to shave the firewall using 18 gauge sheet metal, 3M panel bond and a little filler... Ford HP White with satin clear... I glossed over a ton of stuff but I covered most of the high points, now it's back to block sanding and more sanding... Last edited by Black_Sheep; 08-11-2017 at 07:46 PM. Reason: reduce picture size