View Single Post
Old 03-09-2021, 06:23 PM   #498
Vic1947
Senior Member
 
Vic1947's Avatar
 
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 1,984
Re: 57 Chevy Wagon - Californa Dreamin'

The parts I took to Hot Rod Express for paint are nearly done. Some touch up and buffing are all that's left to do. Hope to pick them up this week. The oil catch can is plumbed, the power steering hoses are in and tested and the fuel lines are complete as well.

Figured now was as good a time as any to mock up the remaining brake lines. So I hung the vacuum booster, master cylinder and proportioning valve then bent the lines to fit. The Wilwood proportioning valve has separate ports for the front brakes, so I had to revise my layout slightly. Could have plugged the extra port and run a single line to the tee I had in there, but what the heck, I had the time and the fittings so I made the change.

As you can see from the photo, I installed a CPP relocation bracket that moves the vacuum booster forward, up and outboard a couple of inches. Results in more clearance for the coil covers. Per the law of unintended consequences, I'll be surprised if something doesn't interfere somewhere.
Attached Images
  
__________________
Victor
57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX
Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany
Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown
Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas
Vic1947 is offline   Reply With Quote