Re: Jesses' 48 PU
I installed the windshields on mine and it was surprisingly straight forward.
I installed the glass into the seal on the bench, , held with masking tape, and then rested it on the cowl and did the 'rope trick' from the inside and removed the tape once it was in.
also, I would recommend some sealant, between glass and seal, and seal and frame, as mine leaked in the corners and it would have been much easier to add during the install.
I found that as soon as I added the new glass, the truck changed from a neglected 'farm truck' to a road worthy vehicle.
keep it going
|