[jimmythompson1964]

I bought a hood about 6 or 7 years ago originally for the 62 but now it will go on the 66, it looks good no rust or major dents The PO said it flew up and bent the rear brace where it mounts to the hinges. With my truck apart I finally decided to take on this challenge of change out that brace. It's interesting that I own 3 trucks and 4 hoods, and out of them all including the one I'm driving only 1 had a brace that was not bent at the hinges must be a common thing, oh well, so it was Game On. I took my time with the hood I wanted to reuse and was able to remove it without damaging the hood. The donor hood not so much it was a rust bucket in front, the donor brace had some rust where it mounted to the hood so I cut it out and welded in patch pieces and made it ready for install. It was even a challenge to get the hood turned over and supported with towels to keep from bending it from its own weight while working on it. I set it up on my trailer so it was out side and the rain kept me from finishing it completely but did get it put back together and clamped ready to weld. So much to do and so little time, I have only this coming weekend to complete everything and be ready for nearly 2,000 miles of Hot Rod Power Tour fun. This will be a busy week end for sure. I need 2 of me. I will put it on next weekend before I leave for the Power Tour.