After finishing up the teardown, I started to put together the front suspension. We decided to go with a FatMan Fab Stage IV Mustang II Hub-to Hub Air-bag Kit with a power rack. Pretty happy with the quality of the parts, build quality was pretty good on the kit.
Getting the cross-member centered and leveled.
I welded on a temporary piece of angle iron on to the upper bag mounts to keep them level and properly aligned.
Cross member and upper bag mount tacked in place.
Passenger side test fit.
Finish welded
Cut in the rack arm clearance inserts and sprayed some temp. primer on everything. Full test fit of the driver & passenger side as well as the rack. Everything fit really well and cycled smoothly.