The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Re-jet small body 2gc for a 350?

Greasey Harley · 03-25-2021, 11:54 AM

Will a small body 2gc support a mild 350?
By mild, I mean:
9.5:1 cr, 1.72" valves, mild cam( https://www.summitracing.com/parts/mel-cl-mtc-1) , good quench, stock ignition, cast iron manifolds.
It should be about 225hp±

What would it take to set up the 2gc that came on the 327, so it would work on the 350 I'm building?
Yes, I am 100% aware that there are probably better options.
Anybody know where to start with the jetting?
Is the small body carb just too small?

03-25-2021, 11:54 AM	#1
Greasey Harley Registered User Join Date: May 2013 Location: Post Falls, ID Posts: 884	Re-jet small body 2gc for a 350? Will a small body 2gc support a mild 350? By mild, I mean: 9.5:1 cr, 1.72" valves, mild cam( https://www.summitracing.com/parts/mel-cl-mtc-1) , good quench, stock ignition, cast iron manifolds. It should be about 225hp± What would it take to set up the 2gc that came on the 327, so it would work on the 350 I'm building? Yes, I am 100% aware that there are probably better options. Anybody know where to start with the jetting? Is the small body carb just too small? __________________ Insert clever text here: Last edited by Greasey Harley; 03-25-2021 at 12:02 PM.