The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

raelynne71 · 01-18-2014, 10:23 PM

Hi there. I'm new here so forgive me if I'm posting this in the wrong place, and I've already searched the forums trying to find my answer but had no luck.
So here it is: I just purchased a '71 with a 402. This is my first BB, first PS truck and first AC. The previous owner (or someone who did work for him) did some funky schmidt with the front end of the engine and the PS pump is almost 1 1/4 out-of-alignment with the crank pulley. I could spend half a day fabbing mounts and shimming to make things right, but what I'd really like to see is some nice photos of a bone-stock setup that would clarify how things came from the factory.

01-18-2014, 10:23 PM	#1
raelynne71 Registered User Join Date: Jan 2014 Location: Magnolia, TX Posts: 1	BB Accessory Belts Hi there. I'm new here so forgive me if I'm posting this in the wrong place, and I've already searched the forums trying to find my answer but had no luck. So here it is: I just purchased a '71 with a 402. This is my first BB, first PS truck and first AC. The previous owner (or someone who did work for him) did some funky schmidt with the front end of the engine and the PS pump is almost 1 1/4 out-of-alignment with the crank pulley. I could spend half a day fabbing mounts and shimming to make things right, but what I'd really like to see is some nice photos of a bone-stock setup that would clarify how things came from the factory.