[jasinger01]

I swapped out the bushings at the transmission arms as well. I used two per arm, to sandwich the transmission arm, and then put the linkage rod through and secured with cotter pins. I did order the 'C' style clips as well from classic parts, I will swap those in this weekend.

Here are the PNs if anyone else wants to go through their 3 on the tree bushings.

Bushings at the top of the linkage (2 required) 91-065
grommet for the shift tube (2 required) 91-062
grommet for the transmission arms (4 required) 91-063