[TxCajun]

I've been wire brushing and poking at the rust in the roof and around the windshield to determine which areas need to be patched using parts from the extra roof that I found on Craigslist. There are several areas around the windshield and the driver's side drip rail that are pretty crusty.

I decided to dive in and start with the center section above the windshield which was a nasty mix of bondo, window screen, fiberglass resin, canned spray foam, and rodent nest/droppings.

I've heard that if you have to grind your welds to make them look good you are not a welder, you are a grinder. I definitely fall in to the latter category, but I think the welds are full penetration and strong. Hopefully I'll improve as I go along.