The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Help Me Identify This Part

es67chevy · 03-01-2011, 11:55 PM

We didn't have a working horn when we bought it and it is not an A/C truck so I'm leaning towards horn relay. And I don't think we will need it for our build because we're using a Painless Wiring setup that doesn't appear to use a relay (Someone correct me if I'm wrong here).

I knew I should have documented where we took it off from. I'm pretty sure it was to the left of the steering column. I'll try to find some pics of the firewall that we've taken and see if I can identify where it was mounted.

Thanks all!!

03-01-2011, 11:55 PM	#12
es67chevy Registered User Join Date: Aug 2007 Location: Bella Vista, AR Posts: 1,107	Re: Help Me Identify This Part - Hint: It was under the dash We didn't have a working horn when we bought it and it is not an A/C truck so I'm leaning towards horn relay. And I don't think we will need it for our build because we're using a Painless Wiring setup that doesn't appear to use a relay (Someone correct me if I'm wrong here). I knew I should have documented where we took it off from. I'm pretty sure it was to the left of the steering column. I'll try to find some pics of the firewall that we've taken and see if I can identify where it was mounted. Thanks all!! __________________ Eric 1967 C10 SWB 383 Stroker/TH400 Brother's One Piece Power Windows Shaved Doors, Markers, and Bumpers 4/6 Early Classic Drop Rear Fuel Tank (49-52 Chevy Car Tank) Surf Blue Paint Bella Vista, AR (Arkansas for those that get the 'A' states mixed up) My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=330869 Last edited by es67chevy; 03-02-2011 at 12:00 AM.