01-22-2012, 12:01 AM
|
#21
|
But Found Her 25yrs Later!
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,497
|
Re: Proportioning valve
pasted:
Quote:
The front port on the m/c connects to the front top port on the combination valve. It's a 1/4" line, and has a 1/2-20 oversize nut on the m/c and on the valve.
The rear port on the m/c connects to the rear top port on the valve. On the m/c there is a 9/16-18 oversize nut, 1/4" line, and a 7/16-20 nut on the valve (standard fitting for a 1/4" line).
The port on the angled surface at the front of the valve, and the port on the bottom front of the valve are 3/8-24, standard for 3/16" line. These 2 ports are for the front brakes.
So - 1/4" line and appropriate nuts from m/c to valve. 3/16" line and standard nuts for the front brakes. 1/4" line and a standard nut for the rear brake line.
|
|
|
|