|
Clean Frame and Frame Mods
While we had the frame down to bare metal we thought it would be a good time to do a little frame stiffening.
Along the frame from the rear axle up to the front control arms we boxed in as much of the frame as we could without knowing exactly where the trans cross was going to go.
I thought I had more pictures of the metal fully welded in but here is just them tacked in... look at the painted frame to get a better look at the finished stuff especially up front with all of the frame twists.
the last photo was just us tacking the next plate in to get a good mark on the back for cutting to fit.
|