[washington blue]

Best pics I could find of the tail pipes near the tank. The pipes are along the outer edge of the frame and the tank is in from the frame about an inch. Lowering the rear of the exhaust would be easy as it drops straight down behind the axle. In front of the axle the 45 degree angle would be tough, slices or wedge type of cutting would be required. Might have to do that. I'll study some more. The other picture shows the fuel setup, you can see in the pics. it is behind the stock crossmember and the exhaust is in front of it. What would be good to wrap the fuel lines with? Sure would have been easy to run the exhaust out in front of the wheels, lol.