SO I took the ENTIRE innards of the carb out, (I mean everything!) and cleaned the crap out of it with carb cleaner and a good ole air hose set at 90 psi
I cleaned everything out 3X just to be sure! This was one of my biggest motivators to do an underbed tank, I knew the one in the cab was crap to begin with. I did check the fuel filter, (it's a clear one) been on the truck 3 months and still clean as can be
I had to keep some of my old 700R4 tv cable bracket because it had the return spring for my gas pedal on it, so I cut off the part I didn't need (it was in the way of the new BTO kit) and reinstalled it. I then put the BTO piece on the carb and tightened it down. Then with the supplied gaskets I put the BTO piece on the manifold, put the carb back on, tightened everything down, and the beast fired right back up
Sorry, but I forgot to take pics of the inside of the cleaned carb (it's clean in the first pic) and of it back on the intake
I did not hook up the BTO kit yet because my tranny is junk
There will be more on that in what looks to be more like late september.....
