The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project S-10?

67ChevyRedneck · 01-09-2010, 01:09 AM

Next up is the seatbelt install. It's simple. Use the existing bolt hole that you won't be using for the seat brackets. It was already designed to hold the seat bracket/seat belt buckle. The floor is also braced in this area from the factory. It's a T-50 Torx screw.

I was able to unclip and use the stock wiring from the old seat and clip into the new seat belt buckle. No cutting required

01-09-2010, 01:09 AM	#28
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Project S-10? Next up is the seatbelt install. It's simple. Use the existing bolt hole that you won't be using for the seat brackets. It was already designed to hold the seat bracket/seat belt buckle. The floor is also braced in this area from the factory. It's a T-50 Torx screw. I was able to unclip and use the stock wiring from the old seat and clip into the new seat belt buckle. No cutting required Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 01-09-2010 at 01:16 AM.