View Single Post
Old 08-24-2010, 04:07 PM   #70
Butcherboy
Registered User
 
Butcherboy's Avatar
 
Join Date: Sep 2009
Location: Mulvane, Kansas
Posts: 85
Post Re: The 5.3 Blazer build

Just installed the exhaust.

The muffler shops around here didn't act like they wanted to fool with me. So I bought a 2 1/2" U-fit kit from Jeg's and a Pair of S/S 40Flowmasters.
It was a cut and fit thing!

Besides my ugly welds, I think it came out ok. Even though the Driver side was a the fickle, I was able to tuck the pipe enough to clear the ground and the stock trans cross member.

Name:  exhaust 001.jpg
Views: 1946
Size:  53.1 KB

Name:  exhaust 002.jpg
Views: 1641
Size:  36.2 KB

Name:  exhaust 006.jpg
Views: 1740
Size:  46.5 KB

Name:  exhaust 013.jpg
Views: 1741
Size:  69.8 KB

Name:  exhaust 008.jpg
Views: 1478
Size:  40.3 KB Dump over the Axle.

Here is a Video of it Trying to Idle! Needs a Good tune Real bad!

But you can hear the 227/233 .584LFT Lunati Voodoo cam Lope.


Getting the ECM sent off this week for tuning.

Justin

Last edited by Butcherboy; 08-24-2010 at 04:08 PM.
Butcherboy is offline   Reply With Quote