The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**biketopia** · 10-03-2022, 07:55 AM

Updated With Pictures at the end
So on my 5 acres I have a 4 stall run in barn that is structurally fantastic. The outer cladding however has seen much better days. It currently has t1-11 on the two ends and plywood with small doors for a horse to stick its head out on the back. I want to redo the siding on it, is my best course of action to suck it up and go with t1-11 or would I possibly have another option that might not be $30+ a sheet.

10-03-2022, 07:55 AM	#1
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,008	Alternatives for siding run in barn Updated With Pictures at the end So on my 5 acres I have a 4 stall run in barn that is structurally fantastic. The outer cladding however has seen much better days. It currently has t1-11 on the two ends and plywood with small doors for a horse to stick its head out on the back. I want to redo the siding on it, is my best course of action to suck it up and go with t1-11 or would I possibly have another option that might not be $30+ a sheet. __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350 Last edited by biketopia; 06-20-2023 at 12:23 PM.