View Single Post
Old 09-18-2011, 07:40 PM   #10
DavidB
Registered User
 
DavidB's Avatar
 
Join Date: Jun 2007
Location: South Carolina
Posts: 106
Re: 12 bolt rebuild + Eaton

Going to hammer in the pinion bearing races with the same tool.
You had six bearings in your rebuild kit. The wheel bearings were easy to spot. Now you have four races and four wheel bearings. Take out the two races and bearings that are the exact same those are your carrier bearings. The last two are for your pinion, hammer the big race in from the cover side and the small one in the back. Then you can go ahead and hammer in the pinion seal same way as we did with the axle seals.
DavidB is offline