The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

DavidB · 09-18-2011, 08:58 PM

Carrier installation "take one" Remember from dis-assembly you have to hold the races on the bearings along with the shims on the correct sides and it should be as tight going in as it was coming out. Then put your caps back on.

09-18-2011, 08:58 PM	#16
DavidB Registered User Join Date: Jun 2007 Location: South Carolina Posts: 106	Re: 12 bolt rebuild + Eaton Carrier installation "take one" Remember from dis-assembly you have to hold the races on the bearings along with the shims on the correct sides and it should be as tight going in as it was coming out. Then put your caps back on. Last edited by augie; 02-16-2012 at 12:24 AM.