Quote:
Originally Posted by dayj1
I'm not aware of the ability to enable/disable cruise in the tune. If you're sure that your wiring is correct and that you have the resistor wired in correctly, it could be your VSS. Is the VSS sensor installed in the trans and connected to the PCM? Are your gear ratios, tire sizes, etc correct in the tune?
|
I've been following this thread and the only thing I havent verified from my cruise not working is what you suggested about the VSS. My speedo is working , but i'm not sure how the test for a signal at the PCM. Would I just test the wiring for continuity from the VSS to the PCM? I would have to figure which pin gets the input. Could a code reader confirm this signal?
My truck has a 2005 LS DBW, 6spd mtm from a CTSV. I dont have access to HP tuners, but feel this might be next. Any input would be appreciated.