Re: Doing LS Swap - I have no idea what I'm doing!
If you have PTFE line, use it. After using both, the PTFE is much easier to use and is a smaller outer diameter making it a little easier to route. I used Hot Rod fuel hose brand for the fuel lines I re-did on my Camaro last weekend. After all the traditional AN lines I made on that car, I really wish I just started with PTFE, much easier to work with.
__________________
71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop.
07 Silverado Classic 2wd
95 Camaro 427SBC/TH350
|