View Single Post
Old 06-27-2022, 06:57 PM   #4
Senior Member
dmjlambert's Avatar
Join Date: Apr 2016
Location: Cypress, TX
Posts: 2,707
Re: No power to gauge cluster?

Here are a couple of threads you may find useful info in.
Instrument cluster, gauge type
fuse panel

Which fuse are you checking? I had trouble testing for voltage through the rust, but if you stab the voltmeter or tester into the fuse end cap and fuse holder you should get a reading. The fuse outlined in purple in the picture below is the one that should have power in the key on position.

Check for voltage on the pink wire at the instrument cluster. With key in on position you should be getting power on that wire.

Are your instrument cluster lights working? How about the turn signal lights on the instrument cluster? Does the brake light come on during start?

Is your instrument cluster plug have the wire colors in the correct spots on the connector? I ask because the non-gauge cluster has different wiring at that plug.
Attached Images

Last edited by dmjlambert; 06-27-2022 at 07:11 PM. Reason: fixed picture
dmjlambert is online now   Reply With Quote