|
Re: New Holley Choke Plate Shaft is too Fat
If you like tuning Holley carbs(I do)....you will not like that Edelbrock carb. My thoughts go like this....3.to/4 flaps on the peddle, & lite that booger off. You may need to keep your foot on the peddle, to keep her running......if she runs good after warm up, you are good to go  I would not drill the top of that carb. You can probably source a 750 or 800 DP for parts, & have all the pcs that you need. Dont be afraid of that mechnical choke, I have ran plenty of them....no issues. Best of fun,Longhorn 
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|