The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jocko** · 09-21-2020, 11:31 PM

Some good info in posts 13-16 of this thread. I would test the temp switch inside the air cleaner, lubricate then make sure the flapper valve moves freely when a vac signal is applied, and replace any dried out vac lines while you're at it.

09-21-2020, 11:31 PM	#2
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,936	Re: Air cleaner question Some good info in posts 13-16 of this thread. I would test the temp switch inside the air cleaner, lubricate then make sure the flapper valve moves freely when a vac signal is applied, and replace any dried out vac lines while you're at it.