Quote:
Originally Posted by 69GMC2004
I had to modify my c-notch to mount the rear coil brackets to the frame. I welded in the c-notch instead of bolting it in. QA1 will not sell the upper coil mount with built in c-notch alone and you can only get the QA1 c-notch if you buy the kit that include their arms (which was nearly an extra $2000 Canadian when I purchased them). It does work, but I can almost promise you that you will need to modify your notches.
I can send you some pictures if needed too.
|
After looking at pics I’m thinking I will need to trim part of my c notch for the coil over mount to fit properly but shouldn’t be much of a problem . Here is a pick of my c notch
Posted via Mobile Device