[ncoonen]

Once I have the time, I plan to drill a 7/16" hole for each pushrod. One will come up through the cowl lip, where the back of the hood meets the cowl. The other will go through the curved firewall up behind where the underdash heater air hoses run. I'll patch the hole in the cowl lip in a manner TBD. The other hole will get a proper firewall grommet and I'll use it for the tach, oil pressure, and water temp gauge wiring. In the picture above you might notice the tach signal wire going through the firewall in a simple hole with some RTV smeared on it..

I'll post some pictures when the deed is done.