Re: Rustbuket 67 build "Georgia"
Here I am attaching the "A" pillar. since i cut it up too high as i said previously I used a piece of scrap aluminum (.125) to back the welding surface retained by a sheetmetal screw in the lower hinge hole. Thinking i didnt want any porcupines (stray weld wire) hangin in the way of the hinge mount cage nut thingy. I welded across the front only where the hinge attaches so it would have just enough flex to cram the kick panel in behind it. then i welded the bottom of the cage nut thing to the "A" pillar.
__________________
Dan <---(my name)
67 SWB C10 project "GEORGIA"- 59 Brookwood 2dr wag...Next project- 03 Tahoe 4x4 5.3 family ride- 07 Hondur Accord, commuter car
|