[duramax55]

rn rdthefox i wouldn't go less than 240 to scuff it down then go high build block with 240 to noke it down and move to 320 and 400 for singel stage paint. at any point if you see its not going to get all the low spot re shoot win high build.forgot to mention to use guide coats between grit change. guide coat help to see low spot's. go to 600 for a base coat clear coat. just how i do it. when doing high build do at least 2 coats and wait for it to flash between coats about 20 minutes better to wait a bit more than to try and rush to put it on