The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**70STOVEBOLT** · 07-29-2019, 03:58 PM

Got the front third of the frame painted. I ended up removing the entire front suspension and replaced all wear parts. Found NOS upper and lower ball joints, used US made Moog lower control arm cross shafts and Dorman upper control arm cross shafts. The steering components were good, as I had replaced them previously with all US made Moog parts a few years ago. Removed the steering box and painted it as well.

07-29-2019, 03:58 PM	#18
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,214	Re: '70 C/10 The Needy Beast Got the front third of the frame painted. I ended up removing the entire front suspension and replaced all wear parts. Found NOS upper and lower ball joints, used US made Moog lower control arm cross shafts and Dorman upper control arm cross shafts. The steering components were good, as I had replaced them previously with all US made Moog parts a few years ago. Removed the steering box and painted it as well. Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear Last edited by 70STOVEBOLT; 08-16-2019 at 09:16 AM.