[bagged91]

In case you weren't aware, the burb pass front rocker is burb specific. The pickup rocker can be used but will have to be modified. You will need the part from your original burb rocker that attached to the B pillar and that will need to go onto the p/u rocker. For the lower 1/4's infront of the wheel arch's, you can use the blazer lower front patch's as they have the correct shape at the bottom. The LWB bedsides are shaped differently at the leading edge of the opening(sorta rounded instead of squared off). Blazers, burbs & SWB p/u have the same rear wheel arch... If you need floor braces, the front ones are the same as p/u but that's it. The one's by the b pillar are different...