thinking about these to keep the vent and close off the soffit.
https://www.homedepot.com/p/Owens-Co...70RM/204848302
I will run wire in the wall and put a 3/4" hole in the inside metal and use a plastic grommet to feed the wire through inside panel. My boxes will be surface mounted using the top holes in the box to fasten through the metal and to the purlins. I thought about running a 1 1/4" pvc trunk line on the surface and dropping out of T's where i want receptacles, but i don't want to see all that PVC. I will also run a 2'PVC from the panel up the inside wall to the attic for future wire runs if needed that way i can drop the romex through the conduit and not need to take off metal panels. The ceiling will have 2-50' retractable receptacles and air lines. I'll also pull a piece of 14/3 romex from the house to turn the pole barn exterior lights on from my attached garage.