The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**72tutone** · 04-06-2021, 10:05 AM

The engine perches installed onto the frame do not dictate this. Its more so the mounts installed onto the engine. Some are fixed, some slide. The slide ones are what you want. That is where the adjustability comes in.

The CPP slider mounts I also have for sale are supposed to allow a low mount AC to be installed. From the summit link -

https://www.summitracing.com/parts/c...yABEgLMcPD_BwE

Notes:
Adjustable from 2.25 to 3.75 in. forward for engines with low mounted A/C compressor.

I never tried installing mine though. But the slides worked well. Worse case scenario I've also seen an aftermarket bracket that hugs the engine real tight to low mount an AC compressor.

04-06-2021, 10:05 AM	#5
72tutone Senior Member Join Date: May 2010 Location: St.Louis Posts: 637	Re: CPP Engine Mounts The engine perches installed onto the frame do not dictate this. Its more so the mounts installed onto the engine. Some are fixed, some slide. The slide ones are what you want. That is where the adjustability comes in. The CPP slider mounts I also have for sale are supposed to allow a low mount AC to be installed. From the summit link - https://www.summitracing.com/parts/c...yABEgLMcPD_BwE Notes: Adjustable from 2.25 to 3.75 in. forward for engines with low mounted A/C compressor. I never tried installing mine though. But the slides worked well. Worse case scenario I've also seen an aftermarket bracket that hugs the engine real tight to low mount an AC compressor.