[tmills213]

Not sure where almost a year went since I posted, oh wait, kids haha. I finally had enough again (again) and moved the truck to the lift so it motivated me to work on it.

-Fuel system
- -6 return -8 feed PTFE braid to Nicopp hard in between. going E85
- diesel truck fuel iflter 6 micron at the tank (fed be walb 450)
- jeep 16 gallon tank with custom sending unit/ AN bulkheads (super simple piece)
- made the bracket to mount it in the rear. did have to cut rivets on one crossbar. Will decide if it goes back in later.
-need to figure out filler neck/breather still

Trans
- cooler is 11" remote syst from am. volt. its a cheap one and ill see how it does. under passenger bed for ease. THis will be regular rubber trans hose and barb fitting. my AN fitting costs are getting ridiculous and dont think i needed here.

I'm sure there is something else in between...

miscellaneous :
-steering linkage mounted
-cruise control mounted
-turbski drain plumbed and fitting welded in pan.
-coils are mounted (in a weird spot but we will see)
-Ditched the stock harness and sold my soul for a holley Xmax.