Slow progress on the bodywork. Much like being noob on replacing rusted rockers, I started my noob bodywork journey on the wheel wells. I figured this was the best place to start as they are hidden under the hood. I hammered out as many dents as I could see and filled in the rest with some filler. I pictured applying filler in the same way you use plaster with drywall. It's similar but filler dries pretty quick and is much more difficult to sand down. I laid down another coat of epoxy primer after the filler and then hit it with some low gloss Eastwood Underhood Black. They turned out not terrible
so I moved on to some body panels.