The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ratty69 · 09-26-2017, 11:24 PM

Ford made both 6" and 7" wide. Iirc, Dodges were 6". Ford wheels will be marked with the Ford logo, and the 7s will be marked ACCURIDE 16X7 near the edge. Dodge wheels are marked with the pentastar. No GM wheels I've seen were marked GM.

Dodge has the biggest hub bore, then Ford, then GM. GM has 9/16" studs, so the others will likely need to be bored slightly.

Hope that helps.

09-26-2017, 11:24 PM	#2
ratty69 Registered User Join Date: Jun 2016 Location: Vancouver B.C. Posts: 206	Re: 16" 8 lug steelie question Ford made both 6" and 7" wide. Iirc, Dodges were 6". Ford wheels will be marked with the Ford logo, and the 7s will be marked ACCURIDE 16X7 near the edge. Dodge wheels are marked with the pentastar. No GM wheels I've seen were marked GM. Dodge has the biggest hub bore, then Ford, then GM. GM has 9/16" studs, so the others will likely need to be bored slightly. Hope that helps.