|
Flamethrower not working - need help
This Pertronix Flamethrower distributor came on the SB 327 in my ‘68 Suburban and has worked flawlessly until now. After recently reworking the cylinder heads, I reinstalled the distributor as removed. However, now it does not produce spark.
Checks confirm that it is getting 12+ volts from the switch and good grounding. I have disassembled the dist cap and can find nothing amiss, but am very unfamiliar with this thing and do not know the diagnostic procedure. I have been unable to find such info online – even at Pertronix web sites.
I will appreciate receiving a source for such info or an explanation of the process here if not too consuming of your time. Thanks.
__________________
CCCC
67 Sting Ray Coupe 327 4sp; 68 K10 Suburban 327 4sp; 69 K20 Lifted 383 4sp; 69 C80 Fire Truck 478 V6 5sp/2sp; 69 C20 Longhorn 327 4sp; 70 C30 Wrecker 350 4sp; 70 C30 Flat Bed 350 4sp; 71 C20 LWB 350 4sp; 72 K5 Blazer 350 4sp; 72 C30 Flat Bed Gooseneck Hauler with sleeper 350/TH400; 72 C20 Longhorn 402 4sp; 52 Mack LTL Supercharged Cummins 5sp x 3sp; 01 Dodge 5.9 HO Cummins 6spd; 02 Safari Trek 2430 8.1 Vortec on Workhorse Chassis; 03 Silverado 2500 HD 4wd Duramax/Allison
Moved but still in the family
70 C20 Custom Camper 350/TH350; 72 K5 Blazer CST Highlander 350/TH350
Recently sent to new homes
72 C30 MoHome 402 4sp; 72 K5 Blazer Conv 350 4sp; 75 GMC 6000 Aerial 350 w Allison; 72 GMC 3500 Utility 350 4sp; 70 GMC 3500, 350 4sp
|