|
Re: Trailing arm crossmember with No Limit Arms
I have the Tinworks crossmember. The rear face of the crossmember is flat and his mounts are angled for the trailing arm.
So it has been awhile, bear with my memory. If the Nolimit brackets for the trailing arms are made for the stock cross member is the stock crossmember angled where the original brackets rivet on?
If so the Nolimit brackets will not be angled themselves and if bolted to a flat face will not have the correct angle for the trailing arms.
Hopefully the Nolimit trailing arm joints would fit into the Tinworks bracket.
Clear as mud, right?
|