Springs hung easily and the new bushings from DayStar are working out pretty well. Axle rolled into place. Using the stock axle saddles and u bolts for mock up. They are going to be replaced before its ever driven. Need the rear end in and body mounted and motor in so i know what size lift blocks i will need to match the front lift.
Was excited to see how it sat, so we worked on gettin it on four wheels. An unexpected issue came up. By moving the Tie rod to the top of the spindle it now hits on the back of the stock 17's that i have. So i have a dilemma, either get different wheels or run a spacer.
It started to pour rain again, so that was the end of the weekend.