The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**kev2809** · 08-13-2022, 07:23 PM

oh ok. so I'm assuming the ez wire "ignition switch power" should need a constant 12 volt and will run straight to the battery? it's the only one I can think of that would feed the whole fuse box with power.

the ls 12 volt key will run to the coil wire.

the ls 12 volt battery will go to the battery.

the ls purple starter should go to the solenoid wire from the ez wire kit.

so solenoid power, ignition switch power, and coil wire will be the only ones used from the ez kit.

08-13-2022, 07:23 PM	#5
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Ez wiring under hood wiring oh ok. so I'm assuming the ez wire "ignition switch power" should need a constant 12 volt and will run straight to the battery? it's the only one I can think of that would feed the whole fuse box with power. the ls 12 volt key will run to the coil wire. the ls 12 volt battery will go to the battery. the ls purple starter should go to the solenoid wire from the ez wire kit. so solenoid power, ignition switch power, and coil wire will be the only ones used from the ez kit. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]