The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Dinos63 · 01-12-2008, 06:20 PM

we installed a pancaked cross member in my panel at nates(porter built) few years back and i used the stock steering and box, we had to notch the top control arm for the steering rod, and it wasn't as sectioned as far as yours,worked fine,but thats about the time nate had a better plan for bigger wheels, better steering and narrower track. looks good, nice work, this photo before dropmember and 15" with the pancake cross member

01-12-2008, 06:20 PM	#10
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Cross Member Drop? we installed a pancaked cross member in my panel at nates(porter built) few years back and i used the stock steering and box, we had to notch the top control arm for the steering rod, and it wasn't as sectioned as far as yours,worked fine,but thats about the time nate had a better plan for bigger wheels, better steering and narrower track. looks good, nice work, this photo before dropmember and 15" with the pancake cross member Attached Images __________________ CHEVY ONLY... Nothin Else ! Last edited by Dinos63; 01-12-2008 at 06:59 PM.