[GerhardH]

Last for today: Looking for warped heads, but the heads are already resurfaced:
By the way my orientation is a good book: "How to rebuild your Small-Block.CHEVY by David Vizard". Example given, there you will find that the limit of warpage schould be 0.003" (a compound gasket will take up far more warpage up to 0.005" according David.
Result: Less than 0.0025"

Monday shopping:
16 pcs Rocker stud (because I lend)
16 pcs Rocker arm
16 pcs Ball seat (Pivot ball)
16 pcs Rocker clearance adjusting nut
08 pcs Inlet Valves
08 pcs Outlet Valves
16 pcs Valve Springs (use always new one)
16 pcs Valve spring retainer (I got already with the heads)
32 pcs Keeper (use always new one)
16 pcs Oil seal

To fire on the 50 years old short block:
01 pc Oil pump
01 pc Oil pump securing bolt
01 pc Oil pump pickup pipe
01 pc Oil pump drive shaft
01 pc Oil pump drive shaft adapter
01 pc Oil pan
01 pc Oil pan gasket
14 pcs Oil pan bolts (small) (1/4"-20UNC x 1/2"long)
01 pc Oil pressure switch
10 ltr. Breake in oil
04 pcs oil pan bolts (large) (5/16"-18UNC x5/8" long)
14 pcs oil pan bolts star washer (1/4" diameter)
01 pc Oil filter pressure relief valve housing
02 pc oil filter pressure relief valve housing bolts
01 pc Oil filter spin on cartridge

01 scew set small block
01 gasket set small block