|
Re: 67-72 Frame ID? ( 1/2 ton, 2WD)
C10 2WD came standard with rear coil springs, however leaf springs were an option.
The partial VIN is in two places, as:
The LH frame rail’s top is stamped in two places with the year (1), factory location (Z) and the VIN’s serial number. One is between the carrier bearing cross member and front exhaust hanger. The other is in front of the motor mount platform. .
Also, FYI
The RH frame rail ‘s exterior wall is stamped 3987552 – 572 and 4-23-26, located behind the front cab mount, on my 71 SWB 2WD
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring it from ground up. With assys, the guide accts for 1000s details such as OEM identifications& part numbers, written in short order. 700+ images include assm, illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025
Last edited by 71CHEVYSHORTBED402; 02-08-2023 at 11:27 PM.
|